Master Concrete Slabs, Industrial Shop Foundations, Residential Driveways & Dirt Work in Hot Spring County.
Serving Malvern, Perla, Rockport, and the Ouachita River valley with heavy-duty concrete solutions engineered for heavy equipment, agricultural shops, and residential properties.
Explore our dedicated service divisions serving Malvern homeowners, businesses, and contractors.
Heavy-duty 4000 PSI residential driveways, extensions, and turnarounds engineered for Malvern subgrades.
Monolithic slabs with perimeter turn-down footings, steel anchor bolts, and precision laser elevation screeding.
Full demolition, hydraulic breaking, debris hauling, and fresh 4000 PSI repours with compacted gravel base.
Ashlar slate, cobblestone, wood plank patterns, and non-slip protective sealers for luxurious outdoor living.
Reinforced shoreline seawalls, helical tie-back stabilization, weep hole drainage, and riprap armor.
SB2 aggregate spreading, heavy excavator dirt work, building pad grading, and drainage culvert installation.
Click on any question below to explore expert answers on concrete pricing, thickness, permits, PSI mix strength, and engineering in Malvern, AR.
We provide full turnkey concrete construction including monolithic metal shop slabs, industrial warehouse foundations, residential driveways, driveway replacements, stamped patios, concrete crack repair, and SB2 gravel site preparation.
Monolithic slabs generally cost $8.00 to $11.50 per sq ft, residential driveways range from $8.00 to $13.50 per sq ft, and gravel driveways cost $1.75 to $3.25 per sq ft. We provide free on-site measurements and written estimates: (501) 762-3999.
For heavy farm tractors, semi-trucks, or heavy industrial machinery in Hot Spring County, we pour 5 to 6-inch 4000 PSI slabs reinforced with continuous #4 or #5 rebar grids tied on 12-16" centers over compacted SB2 stone.
In the Ouachita River valley where moisture and alluvial soils exist, we excavate soft silts, place non-woven geotextile stabilization fabric, roll heavy SB2 aggregate base, and install thick 15-mil moisture vapor barriers beneath slabs.
Yes. We review your building manufacturer's engineering diagrams, build wooden template jigs, and set structural anchor bolts at exact coordinates before or during the pour so your steel columns bolt on effortlessly.
4000 PSI concrete offers 33% greater compressive strength, higher abrasion resistance against heavy steel wheels and pallets, and significantly lower porosity, which prevents freeze-thaw damage and chemical spalling.
Light pedestrian traffic is safe within 24–48 hours. Standard pickup trucks can drive on the slab after 7 days. Heavy commercial trucks, loaded trailers, and forklifts should wait the full 28-day hydration period.
Yes. We perform structural epoxy crack injection, rotted wood joint replacement with commercial polyurethane sealant, and heavy pressure washing with penetrating silane/siloxane sealers.
Yes! A & P Concrete Construction handles both the excavator dirt work/site prep and the concrete pour as one package, saving you money and ensuring your pad is laser-level before forms are set.
Yes. We hold Arkansas State Contractor License #0300550824, backed by 27+ years of continuous trade experience and 54 verified 5-star customer reviews.
Serving Malvern, Hot Springs & Central Arkansas for over 27 years.
Submit your project details below or call our master estimator directly at (501) 762-3999.
