Concrete Contractor in Benton, AR
27+ Years Delivering Precision Concrete Driveways, Stamped Patios & Foundation Slabs Across Saline County.
Engineered for Saline County's expansive clay soils. We excavate, install compacted gravel sub-bases, tie continuous #4 rebar grids, and pour 4000 PSI concrete to prevent cracking and shifting.
Benton Concrete Services
- Trade Experience: 27+ Years (Est. 1999)
- Contractor License: AR Lic #0300550824
- Concrete Strength: 4000 PSI Fiber Reinforced
- Steel Reinforcement: #4 Rebar Grid on Dobies
- Service Range: Benton & Surrounding Areas
Full-Service Concrete in Benton
Explore our dedicated service divisions serving Benton homeowners, businesses, and contractors.
Poured Concrete Driveways →
Heavy-duty 4000 PSI residential driveways, extensions, and turnarounds engineered for Benton subgrades.
Shop Slabs & Foundations →
Monolithic slabs with perimeter turn-down footings, steel anchor bolts, and precision laser elevation screeding.
Driveway Replacement →
Full demolition, hydraulic breaking, debris hauling, and fresh 4000 PSI repours with compacted gravel base.
Stamped Patios & Pool Decks →
Ashlar slate, cobblestone, wood plank patterns, and non-slip protective sealers for luxurious outdoor living.
Seawall & Retaining Walls →
Reinforced shoreline seawalls, helical tie-back stabilization, weep hole drainage, and riprap armor.
Gravel & Site Preparation →
SB2 aggregate spreading, heavy excavator dirt work, building pad grading, and drainage culvert installation.
Benton Concrete FAQs
Click on any question below to explore expert answers on concrete pricing, thickness, permits, PSI mix strength, and engineering in Benton, AR.
Q1. How much does a concrete driveway replacement cost in Benton, AR?
Turnkey concrete driveway replacement in Benton typically ranges from $10 to $16 per square foot. This includes utility safety line marking, hydraulic demolition, hauling away broken concrete, subgrade re-grading, 4" compacted SB2 base, and new 4000 PSI repour.
Q2. How do you prevent concrete from cracking in Benton's expansive clay soil?
Saline County red clay swells when wet and shrinks when dry. We excavate uncompacted clay, install a 4-inch compacted SB2 aggregate drainage cushion, tie a continuous #4 rebar grid elevated on chairs, and saw expansion joints every 8-10 feet.
Q3. Why is 4000 PSI fiber concrete better than standard 3000 PSI mix?
4000 PSI ready-mix concrete has higher cement content, creating a much stronger aggregate bond and denser surface that resists winter freeze-thaw scaling. The synthetic micro-fibers distribute millions of microscopic strands that arrest shrinkage cracks.
Q4. How much does a decorative stamped concrete patio cost in Benton?
Custom stamped concrete patios in Benton typically cost $12 to $18 per square foot. This includes excavation, #4 rebar grid, integral color, secondary antiquing release, precision stamping (Ashlar slate, cobblestone, or wood plank), and two coats of UV non-slip sealer.
Q5. Can you widen my existing driveway or add an extra parking pad?
Yes! We frequently add 3rd car parking stalls, RV pads, golf cart turnarounds, and sidewalk extensions. We drill and epoxy steel rebar dowels into your existing slab so the new addition stays perfectly level and cannot shift vertically.
Q6. How long does it take to tear out and replace a driveway in Benton?
A standard residential 2-car driveway replacement takes 2 to 3 days: Day 1 is demolition, clean debris haul-off, and base compaction; Day 2 is formwork, rebar tying, and 4000 PSI pouring; Day 3 is joint cutting, cleanup, and form removal.
Q7. Do you install control joints, and why are they necessary?
Yes. All concrete contracts slightly as water evaporates during curing. We saw control relief joints to 1/4 the slab depth within 12 hours of pouring. This guides natural shrinkage stress into straight, clean tooled lines rather than random cracks.
Q8. Are stamped concrete pool decks and patios slippery when wet?
Not when installed by A & P Concrete. We blend micronized polymer non-slip grip additives directly into the final clear sealer coat, providing comfortable, slip-resistant barefoot traction around pools and outdoor living spaces.
Q9. What permits are required for driveway curb cuts in Benton & Saline County?
Driveway aprons connecting to city streets or county roads require coordination with local street departments. We ensure curb tie-ins, culvert sizing, and drainage cross-pitches meet City of Benton and Saline County engineering codes.
Q10. Are you licensed and insured for residential concrete in Benton, AR?
Yes! A & P Concrete Construction holds Arkansas State License #0300550824, backed by $2,000,000 general liability coverage and 27+ years of master concrete craftsmanship.
Backed by 54 Verified Customer Reviews
Serving Benton, Hot Springs & Central Arkansas for over 27 years.
Request a Free Estimate in Benton
Submit your project details below or call our master estimator directly at (501) 762-3999.